Publicité
CONNECT 10" ROUND DUCTWORK
1. Connect 10" round ductwork to blower. Run ductwork to
downdraft location.
2. Refer to downdraft ventilator manual for instructions
on how to:
• Locate and cut holes in cabinet.
• Attach 10" round duct to downdraft.
NOTE: Use duct tape to make ductwork connections secure
and air tight.
VIKING RANGE CORPORATION
GREENWOOD, MISSISSIPPI 38930 USA
USE AND CARE
Disconnect electrical power supply and lock out
service panel before cleaning or servicing this unit.
CLEANING
Remove cover and carefully vacuum blower and
inside of housing. Be careful not to bend or otherwise
damage blower wheel.
MOTOR LUBRICATION
The motor is permanently lubricated. Do not oil or
disassemble motor.
4
99042942D
Publicité
