Publicité
IF THE VOLTAGE SWITCH IS SET TO 120V ONLY
IF THE VOLTAGE SWITCH IS SET TO 120/240V
12
Set the voltage switch to "120V ONLY"
Output voltage 120V current 20A.
120V (Voltage) X 20A (Current)= 2400W (Output Power)
Output voltage can only be 120V and the current can only be 30A.
120V (Voltage) X 30A (Current)= 3600W (Output Power)
attention: The total power output of the socket must not exceed
the rated power of the generator.
Set the voltage switch to "120V/240V"
Output voltage 120V current 20A.
120V (Voltage) X 20A (Current)= 2400W (Output Power)
Output voltage 120V current 30A.
1&2 120V socket: 120V(Voltage) X 30A (Current)= 3600W (Output Power)
attention: 1&2&3 can output at the same time, the the total
power output of the socket can not exceed the rated power of the
generator, can not be connected to the same load.
OUTLET FUNCTION
Publicité
