Wellcare WE-167FWH Mode D'emploi page 12

GB
without any folds, creases or ruck-up.
2. Always use the foot warmer (6) with the
removable fleece lining (5) and only use the one
supplied with it.
3. Make sure the controller (2) is not covered by the
sheet, pillow or any objects.
4. Plug the mains cable (1) to the wall socket.
Unplug the appliance from the wall socket when it
is no longer in use.
SWITCHING ON
Before each time you use the foot warmer (6),
please make sure it is not bundled, folded or
creased before it is switched on.
Connect the product only to 230VAC. Switch on
the product by using the hand-operated slide
switch (4) and the light on the APS (3) will be
turned on to ensure the product has been operated
correctly.
Temperature settings :
4 = maximum warmth
2-3 = moderate warmth
1 = minimum warmth
0 = OFF
In order to warm up the foot warmer faster, it is
recommended to initially set the foot warmer at the
highest temperature setting.
12