Publicité
Installation and Connection
Connecting microphones and accessories
Connecting external controls
Mains connection
ATTENTION
38
Before connecting, read the operating instructions for your microphones and accessories.
NOTE
Connect microphones and accessories to the back of the DMM 4/2/4:
1)
Connect microphones and other signal sources (e.g. wireless microphone receivers) to
the "MIC/LINE" input channels.
2)
Connect your accessories (CD player, etc.) to the "AUX" inputs using the cinch cables.
3)
Connect the "OUT - MASTER L" and "OUT - MASTER R" output channels to a mixing
desk or amplifier.
4)
Connect the cinch connectors on the recording output "OUT - REC" to a recording device.
Connect the hardware (that you want to remotely control using the DMM 4/2/4) to the DMM
4/2/4 via the 26-pin D-sub "CONTROL IN/OUT" high density jack.
Do not connect the unit to the mains power supply until you have made all the audio
connections!
1)
Connect the power supply unit cable to the appropriate socket on the rear panel of the
DMM 4/2/4.
2)
Plug the power supply unit into a mains socket.
DMM 4/2/4 Stereo
Publicité
