Publicité
PRODUCT SPECIFICATIONS
COMPONENT
Connections
Broom Width
Maximum Pressure
Maximum Water Flow
Maximum Water Temperature
Weight
IMPORTANT SAFETY INSTRUCTIONS
DANGER:
To reduce the risk of injury, the user must read and understand this insert sheet as well as the
operator's manual for their pressure washer before using this product. Failure to follow all warnings
and precautions may result in death, serious personal injury, or property damage.
WARNING:
Observe the safety instructions of your pressure washer.
The product must not be used by children.
Keep all persons/animals clear of the immediate vicinity of the cleaning head.
Keep hands away from moving parts.
Turn off the pressure washer and relieve the pressure when examining or changing the product
and after the completion of the cleaning operation.
The product is not suited for scouring or scrubbing.
Do not run over freestanding corners.
Wear eye protection with side shields marked to comply with ANSI Z87.1.
Test the product in an inconspicuous area.
Not to be used on vertical surfaces.
Do not exceed the maximum rated pressure, volume, or temperature listed in the product
specifications.
ASSEMBLY INSTRUCTIONS
1. Attach the cleaner's 1/4 in. quick connect plug into
the end of the pressure washer wand.
2. Connect hose to the pressure washer and start
pressure washer as described in its Owner's Manual.
3. Pull the pivot knob out and move the pivot coupler
back or forward to achieve the desired nozzle
orientation.
CAUTION:
Risk of injury can occur if the cleaner's 1/4 in. quick
connect plug is not properly inserted into the quick
connect coupler. Make sure you hear a "click" sound
when attaching the 1/4 in. quick connect plug to the
quick connect coupler.
SPECIFICATIONS
1/4 in. Quick Connect Plug
14 in.
3,300 PSI
3 GPM
140°F (60°C)
2.1 lbs.
1
1/4 in. quick
connect plug
3
Quick connect coupler
Pivot knob
www.surfacemaxx.com
Publicité
