Publicité
The Status Led will be BLINKING during the ON / OFF cycles to indicate the
remaining me (in hours) un l the beginning of next cycle (transi on from
ON to OFF-cycle or from OFF to ON-cycle). The indicator is blinking in mul -
ple of 5 pulses.
Examples:
To indicate 7 remaining hours
·
The Status Led will blink in this sequence: 5 pulses, one short pause,
2 pulses and one long pause, repeatedly.
To indicate 3 remaining hours
·
The Status Led will blink in this sequence: 3 pulses and one long pause,
repeatedly.
Note: If the Status Led indicates a remaining me of 3 hours, it means the
actual remaining me is between 2 and 3 hours. During the last hour, the
STATUS blinks only once between each long pause.
STATUS INDICATOR OFF
Indicates the controller has detected an error on the internal clock. The out-
put will be off as long as the indicator is steady OFF. Feel free to contact us
for further assistance.
Please visit www.gardencontrols.com
(855) 262-1800 or at info@gardencontrols.com
STATUS INDICATOR INFORMATION (PULSE)
TROUBLESHOOTING
For Warranty & Customer Service
or contact us at
Publicité
