Publicité
switch "o" symbol at the bottom of the keyboard shows the
power off state).
2. Press FN + E or R or T key to select the location of the
Bluetooth device, E or R or T key indicator flashes, enter the
pairing mode, pairing successful recovery of normal light
mode, short press FN + E or R or T back to the connection
has been connected to the device.
3. FN + Q wired connection mode; FN + W to select the
location of 2.4G devices, W key indicator flashes, enter the
code mode, the code successfully resume normal light
mode.
4. Keyboard power saving function: Bluetooth 2.4G mode
two power saving: one minute without using the keyboard,
the keyboard lights off into the first power saving mode, 30
minutes without using the keyboard, the keyboard into
hibernation mode.
5. plug into the USB cable direct charging, regardless of the
power switch is on or off are to be charged normally, the
blue light blinking is low power, the blue light is always on
charging, the blue light is off full.
Troubleshooting
In case of incorrect operation follow the steps below:
•
Check the integrity of the connectors.
•
Check the connection to the computer correctly.
•
Check the correctness of your computer settings.
•
Disconnect and reconnect the equipment; restart
the computer.
If the problem persists, please contact your local seller.
7
Publicité
