Publicité
To improve results and maximise the service life of the product, the grass should be cut as
short as possible.
Staying too long in one position can damage the grass swards.
12
CLEANING AND MAINTENANCE
WARNING: Risk of injury! Before any maintenance and/or cleaning work:
Switch off the product.
Remove the battery.
WARNING Risk of injury! Scarifier roll (working roll) runs on!
Never tilt, lift or carry the product while the motor is running.
Wait until the product has come to a standstill before commencing any maintenance
and/or cleaning work.
WARNING: Risk of injury! Perform only the maintenance work described here
yourself.
Any other work, especially motor maintenance and repairs must be performed by a trained
professional. Improper work can cause product damage and hence physical injury.
12.1 Cleaning and maintenance at a glance
Before each use
What?
Check the battery and battery connection
for damage.
Check and, if necessary tighten, all screw
connections.
After each use
What?
Clean grass and moss from the product and
the motor's ventilation slots.
12.2 Cleaning the product
Clean the product immediately after each use. Dried-on grass is extremely hard and difficult to
remove.
Empty the grass collector.
Remove residual grass using a brush or plastic scraper (do not use any sharp
implements).
Remove deposits from the wheels.
Wipe down the product with a slightly damp cloth.
Never clean the product with water or high-pressure jet.
MAINTENANCE: the machine should be cleaned at least twice a year by removing the
motor cover in order to be able to remove dried grass.
Copyright © 2019 VARO
POWDPG8020
How?
Visual inspection and if necessary, have
any damaged parts replaced by an
electrician.
Tighten using a suitable tool.
How?
Remove using a vacuum cleaner or brush.
P a g e
| 10
EN
www.varo.com
Publicité
