Publicité
NOTICE D'UTILISATION ET D'ENTRETIEN – GIGAMIX
FR
PREVENTATIVE MAINTENANCE CHECK LIST
After every use
Unplug and inspect power cord
Check the condition of the power cord.
Wash machine thoroughly and wipe down
The arm, the motor block and the control box should not be cleaned with water jet or a
steam cleaner.
Clean the machine using a sponge or a clean, slightly damp cloth.
Verify that the Blender Accessory Hammer (# TB004), the Knife Bell Knife (# TB012) and
the Masher Tool Propeller (# TB013) have no free play when mounted on the unit.
If there is any free play, dismant the accessory and replace the baall bearing (please see
the dismantling instructions in your personnal account on the spare parts website www.sav-
dynamicmixers.com).
Disassemble the cutter blade bell by using the hook wrench (illustrated below -#9388)
following the arrow direction
fig. 1.
10
EN – GIGAMIX – POWER PRO –
fig. 16.
Dismantling the BLENDER accessory (code TB004)
Hook wrench # 9388
Publicité
