Parts Description; Cleaning And Maintenance; Before The First Use - SEMMA CP-3003SEM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Farm houses.

PARTS DESCRIPTION

1. Cover
2. Press cone
3. Filter
4. Jug
5. Axis

BEFORE THE FIRST USE

Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
Connect the power cable to the socket. (Note: Make sure the
indicated voltage on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50-60Hz.
USE
As soon as the half citrus fruit is pressed onto the juice cone, the
motor will be activated.
The motor automatically changes directions when it is switched
on and off. The change of direction increases the juice collected.
Do not run the device for more than 15 seconds without
interruption.

CLEANING AND MAINTENANCE

Unplug the appliance. Use a soft, slightly damp cloth to wipe
appliance surfaces. Do not allow water or any other liquid to get
into the unit.
Never immerse the device under water, the device and the
various parts are not dishwasher-proof.
Components that have come into contact with food can be
cleaned in soapy water.
ENVIRONMENT
This appliance should not be put into the domestic garbage at
the end of its durability, but must be offered at a central point for the
recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your
attention to this important issue. The materials used in this appliance
can be recycled. By recycling of used domestic appliances you
contribute an important push to the protection of our environment.
Ask your local authorities for information regarding the point of
recollection.
Instruction manual
Instruction manual
EN
7
7

Publicité

Table des Matières
loading

Table des Matières