Uni-bond E-556A Manuel D'installation

Flash Patterns
NO. Flash Patterns
1 Single Flash
2 Double Flash
3 Triple Flash
Surface Mount: 3 Holes @ 6" diameter or 3 Holes @ 5
Light should be fused with 5 Amp Fuse
Surface Mount Model: E-556A
Wire Colour Function
Red Power
Black Ground
Blue Pattern Selection
Pattern Selection
Tap blue wire (Pattern Selection) to ground momentarily to change patterns (see Flash Patterns)
NOTE: This unit may not be factory-set to Flash Pattern #1
Suggested Switch Connection
Battery Positive
Power
Ground
Pattern Selection
Magnetic Mount Model: E-556AM
This Light comes with a Cigarette Power Adaptor with the following Sequence;
1. Press the ON/OFF button to turn beacan on/off
2. Press the Flash Pattern button to change patterns
This unit may not be factory-set to Flash Pattern #1
Note: Cutting wires voids the warranty
INSTALLATION MANUAL
NO. Flash Patterns
4 Quad Flash
5 Quint Flash
6 Rotating
(ATM05 sold
(switches sold separately)
Jumper Wires
Visit us at www.unibondlighting.com
E-556A / E-556AM
SAE J845 Class 1
/ " diameter
1
8
separately)
For 12V to 24V DC Applications
Connect To
+12/24 VDC (Power)
- (Ground)
- (Ground)
From Battery Ground
Switch Part No.
ST307
(OFF-ON-MomentaryON)
Last Updated: 09/20/2022
SAE
Flash Pattern button
ON/OFF button