Publicité
Figure 1.
Pour the lava granules into the burner
support covering the burner completely.
Figure 2.
Place the larger rocks
allowing gaps for proper air flow.
Figure 3.
Lay the smaller stones on top of the
larger stones allowing gaps for proper
air flow.
CAUTION:
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
Lava granules used in a fire pit are porous and when heated up to normal operating temperature
CAUTION:
can cause trapped gasses or moisture to expand and cause a "pop" and "launch" outside of the fire pit, which
could cause injury or property damage. Allow lava granules to completely dry after getting wet before lighting
CERAMIC ROCK MEDIA PLACEMENT
Ceramic Rock Placement
(See Figure 1, 2 and 3)
BURN HAZARD. LAVA GRANULES and Ceramic Rocks
WILL REMAIN HOT FOR SOME TIME AFTER USE.
and using the fire pit.
Page 9
Publicité
