Publicité
Installation Instruction
The safety during use can only be guaranteed when the hob is installed correctly and
according to the regulations. The installer is responsible for any damage caused by a
faulty installation.
The appliance falls under protection class l and can only be used in combination with
a grounding conductor connection. The manufacturer accepts no responsibility for any
malfunction or damage caused by incorrect electrical installations.
The appliance must be connected to a fixed installation and the means of disconnecting
it from the fixed installation must be installed according to the installation instructions.
The connection cable must hang freely. Do not tie the power cable or pass it along
sharp edges. If there is an oven installed below, pass the cable along the rear corners
of the oven to the connection box. It must be positioned so that it does not touch any
of the hot parts of the hob or the oven.
The connection point, the wall socket and/or plug must always be accessible.
The worktop on which the hob is placed should be flat. Follow the instruction of the
manufacturer of the worktop.
Damage caused by incorrect connection, incorrect fitting is not covered ny the guarantee.
Attention: Any change to the appliance's interior and changing the power cable, must
only be performed by a qualified electrician.
OUTER DIMENSIONS
In the drawing below, all the dimensions are displayed in mm.
Sufficient clearance around the hob is essential for a safe use of the hob. Check that
there is sufficient clearance. The minimum distance of the hob to a cooker hood should
be at least 650 mm.
Publicité
