Publicité
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. Cleaning the LCD display screen: first, ensure that the power adapter you are using matches electrical standards for your region.
•
Turn off the LCD monitor and unplug the power adapter.
•
Spray a solvent-free cleaning solution onto your rag and gently wipe the screen.
•
Never spill any liquid directly onto or into the screen or its case.
•
Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case.
•
Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
2. Do not place the LCD display near a window. Exposure to rain, moisture, or direct sunlight can cause serious damage to the device.
3. Do not press on the LCD screen. Excessively forceful pressing can cause permanent damage to the display.
4. Do not remove the case or attempt to repair the machine by yourself. All maintenance tasks should be performed by an authorized
technician.
5. Store the LCD display in a room with a temperature between -20°C-60°C (-4°F-140°F). Permanent damage may result if the LCD
display is stored outside of this range.
6. Unplug the monitor's power adapter immediately and contact an authorized technician if:
•
The signal cable between the monitor and the computer is worn or damaged.
•
Liquid spills onto the LCD display or the display is exposed to rain.
•
The LCD monitor or case is damaged.
Attaching the monitor base
1. Unpack the monitor base and place the base on a smooth work surface.
2. Unpack the monitor.
3. Attach the monitor stand arm to the base.
•
Make sure the base snaps into the monitor stand arm. (Selected models only)
•
Use a screwdriver to turn the black screw to secure the arm to the display. (Selected models only)
Connecting Your Monitor to a Computer
1. Turn off your computer and unplug the power cord.
2. 2-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA cable to the computer. (Optional)
2-2 Connect HDMI Cable (Only HDMl-input model) (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMl cable to the computer.
2-3 Connect DP Cable (Only DP-input model) (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
3. Connect the Audio cable (only Audio input model) (optional)
4. Connect the USB Type C Cable (only USB Type C input model)
(Optional)
5. Insert the monitor power cable into the power port at the back of
the monitor.
6. Plug the power cords of your computer and your monitor into a near
by electrical outlet.
7. Select Power-off USB charge ON/OFF to enable/disable Power-off
USB charge function. (Optional)
External control
~
HDMI (optional)
VGA IN (optional)
AUDIO IN (optional)
AUDIO OUT (optional)
No.
Item
1
Power button/indicator
2
Hotkey 1, 2 buttons
3
Input button
Navi/OK button
4
VGA
(optional)
USB (optional)
DP (optional)
USB Type C (optional)
Description
Turns the monitor on/off. Blue indicates power on.
Amber indicates standby/power saving mode.
Press to activate user defined hotkey function.
Press to toggle input sources.
Press to activate the OSD menu, then use it as
directional key to highlight the desired function.
Press it again to enter a selection.
Note: The location and names
of the sockets on the monitor
may vary according to monitor
model, and some sockets may not
available for some models.
Publicité
