Télécharger Imprimer la page

Perel VTUSC3 Mode D'emploi page 4

Publicité

Never leave the cleaner unattended when plugged in.
Keep the cleaner away from heat sources such as radiators. Operate on a dry and level
surface.
Do not immerse the cleaner.
This cleaner is suited to clean a wide range of materials. However, we recommend not
to clean following items:
o delicate materials such as hawk's-bill, pearl, emerald, ivory, coral, agate...;
o brittle metals such as solder;
o non water-resistant watches;
o other materials such as wood, contact lenses, ceramic, camera filters...
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
4.
Operation
Open the lid and place the object to be cleaned nicely spread onto the grill.
Fill the tank with tap water. Mind the markings (MAX and MIN).
Connect the cleaner to the mains using the power cord.
The cleaner will display 180. This is the most common working cycle. Press SET to
select another cycle if desired.
Press ON to start the cleaning process. The green LED will light and the timer will count
down. You will also hear the cleaner buzz. The cleaner will switch off as soon as the
timer reaches 000. Press OFF to stop the cleaning process manually.
Press the TC button to switch on the heater. Please refer to "5. Cleaning Tips -
Heater" for more details.
When finished, unplug the cleaner from the mains and take out the object out of the
tank. Remove the water from the tank and dry the cleaner.
5.
Cleaning Tips
General Cleaning
Clean any item using regular tap water. Put the object onto the grill and fill the tank so
as to completely submerge the object.
Heater
Use the heater function to remove persistent dirt particles. Note that the water will be
heated to a temperature up to 65 °C/150 °F. Avoid using this function with objects
containing products, which can easily melt like wax. To reduce the heating time, pour
some warm (not boiling!) water into the tank.
V. 03 – 07/09/2018
VTUSC3
4
©Velleman nv

Publicité

loading