Télécharger Imprimer la page

Philips MNT510F Mode D'emploi page 5

Publicité

Install
Before
You
Start
For this antenna to work properly, you must access the menu
on the television you are connecting this antenna to (consult
your television owner's manual) then set it to receive the
signal from an ANTENNA instead of CABLE or SATELLITE.
For UHF reception, position the dipoles
as shown1*5*
For channels 14 through 69
.
rotate and/or tilt
the center loop towards the transmitter.
^=>
4
-
CABLE
□m
ANI -►
g o-;^o o
Using the selector switch
Choose your signal source by switching
from ANTENNA to CABLE.
Note that in the CABLE position,
1 LED lamp will illuminate.
Fine-tune the picture
Slowly increase the gain until you achieve the
clearest picture possible. Rarely, it is necessary
to use the maximum gain.Too much gain may
result in poor picture quality.
Limited lifetime warranty
Philips warrants that This pro-duct shall be free from defects in material, workmanship and assembly, under normal
use. in accordance with the specifications and warnings, for as Ions as you own this product-This warranty extends
only to the original purchaser of the product, and is not transferable.To exercise your rights under this warranty.you
must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of
purchase. For customer support or to obtain warranty service, please call 919-573-7B54.THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. Philips' liability is limited to repair or, at its sole option, replacement of the
product Incidental, special and consequential damages are disclaimed where permitted by law.This warranty gives you
specific legal rights. You may also have other rights that vary from state to state.
5

Publicité

loading

Ce manuel est également adapté pour:

Mant510