Publicité
ENI
Connect
Connect coaxial cable to antenna
1
Connect supplied coaxial cable to the back
of the antenna.
2
Connect the coaxial cable from your cable
or satellite source to the back of the
antenna to the connector labeled IN
FROM CABLE.
Connect coaxial cable toTV
Connect the supplied coaxial cable from the
antenna to the back of your TV using one of
the two methods illustrated4.
Connect power
Connect the power transformer to the antenna
then to AC power outlet.
If you have screw connections on your TV, attach the cable to the matching, transformer and tlicn to
your TV You will need a band separator (not included) to access UHF reception. If you have a 75 ohm
jack and a set of UHF screw connectors on your TV. attach a coax cable to the 75 ohm jack.Tou will
need a band separator (not included) to access UHF reception.
3
Publicité
