Publicité
Appliance Cleaning: Please remove the dust regularly，to ensure constant suction
1.
Hold cleaner over waste basket. Press lever to release bottom lid of dust cup to empty the dust cup
Dust full
2.
Twist filter screen and remove. Lift out foam filter. Rinse and dry THOROUGHLY. Assemble after each part
dried completely
Tip: Aboved steps are suggested after each dustbin empty
Caution
To prevent injuries, please handle with the care of
1.
Do not wash the mechanical part of the dust collector
2.
Ensure each part dried completely before next usage
3.
Do not scrub the filter or apply undue force
4.
Ensure filter is correctly secured during assembly
5.
Change filter if damaged or if cleaning does not return it to its pristine state
Power Brush Cleaning
Please clean the brush when the brush roll or the wheel is entangle by hair.
1.
Disassemble the power brush
2.
Using flathead screwdriver or coin,turn screw to the 'unlock' position. Disassemble brush roll for cleaning
and reassemble after all parts are completely dried
Push
Push
Publicité
