Publicité
• CREATE HOME application is available for Android and iOS (look for the app on Google Play or
App Store or scan the QR code below). Depending on the provider, there may be costs involved
in downloading the app.
• This appliance allows you to operate the appliance via your home network. A prerequisite is a
permanent WiFi connection to your router and the free app CREATE HOME.
• We recommend disconnecting the appliance from the power supply when you are away from
home to prevent unintentional switching on while you are away.
• Install the CREATE HOME app and create a user account.
• Select the time zone to enter the account and click to get the verification code.
• Enter the received verification code for verification.
• Set up a login password and log in the app.
• Click on "Add device" (+) and then select the category corresponding to the
towel rail (heating).
• You can also scan the QR code to add the device directly.
• In the towel rack, press the temperature key
connection indicator light
• Click on "Confirm" while the device indicator light flashes rapidly.
• Enter the password of your Wi-Fi network and confirm.
• While connecting, make sure your router, mobile phone and device are as close as possible.
Afterwards, your towel rack will be successfully added to your CREATE HOME app.
• Before cleaning the item wait until it cools down and plug it out.
• Do not use abrasives and solvents. Wipe the product with a soft wet cloth.
• It is necessary to remove dust from the surface regularly.
• You should not wash the item or place it in water.
• If you are not going to use the heater for a long time, wipe the surface and put the item in
its box.
• It should be placed in a dry ventilated room. Avoid high humidity and mechanical impact
on the item.
E NGL I SH
10
APP CONNECTION
iPhone OS
will start to flash rapidly.
CLEANING
Android OS
for approximately 5 seconds. The Wi-Fi
Publicité
