stayer PRP6 Instructions D'emploi page 7

trimmer guide, be sure to keep it on the right side in the
feed direction. This will help to keep it flush with the side
of the workpiece.
CAUTION:
Since excessive cutting may cause overload of the motor
or difficulty in controlling the tool, the depth of cut should
not be more than 3 mm at a pass when cutting grooves.
When you wish to cut grooves more than 3 mm deep, make
several passes with progressively deeper bit settings
After-sales Service and Customer Assistance
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts.
Our customer service representatives can answer
your questions concerning possible applications and
adjustment of products and accessories.
Stayer Ibérica S.A.
Area Empresarial de Andalucía - Sector 1
Calle Sierra de Cazorla 7
28320 Pinto, Madrid (Spain)
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into
national right, power tools that are no longer
usable must be collected separately and
disposed of in an environmentally correct
manner
EC Declaration of Conformity
The undersigned:
STAYER IBERICA, S.A.
Whit address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 91 691 86 30 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type:
TRIMMER ROUTER
Model:
PRP6
We declare under our sole responsibility that
the product described under "Technical Data" is
ENGLISH
7
in conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives
2004/108/EC, 2006/42/EC.
Signed: Ramiro de la Fuente
Director General
January, 2020
7