Publicité
All manuals and user guides at all-guides.com
Fax +32 2 359 95 50
ASSEMBLY
1.
Insert the tube of the motor unit in the foot (10) and fix it with the foreseen screws (11).
2.
Make sure that the motor is mounted correctly on the tube.
3.
Take the guard mounting ring (5) from the motor housing.
4.
Position the rear guard (6) firmly against the motor housing (7) and fasten by turning the
guard mounting ring (5) clockwise tightly.
5.
Push the propeller (3) along the motor shaft. Fasten it firmly with the locknut (2) by turning
it counter clockwise.
6.
Take the outer ring (4) and put it on the edge of the rear guard.
7.
Now hang the front guard (1) onto the rear guard (6) and tighten up the outer ring with
the foreseen screw.
OPERATION
•
This appliance is equipped with 3 ventilation speeds. To switch on the appliance, turn the
switch. To switch it off, turn the switch to position "0".
•
This appliance also has an oscillation function:
−
Push the oscillation knob to switch on the oscillation.
−
Pull the oscillation knob to stop.
CLEANING AND CARE
•
Always disconnect the power supply cable from the power supply before carrying out
any cleaning operation.
•
To remove dirt from the plastic surfaces, use a cloth moistened with a little water. Use a
vacuum cleaner to remove the dust from the guards without having to disassemble
them.
•
Never immerse the fan in water or any other liquid.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it free of charge to a municipal collection
point performing waste recovery by means of reuse, recycling or use for other applications in
accordance with the directive.
TERMS OF GUARANTEE
For our products, the legal terms concerning claims under guarantee are valid. During the
legal period, all material and manufacturing defects are covered. No claims will be
accepted for broken accessories, defects resulting from inappropriate use or care, excessive
wear due to intensive use, wrong use due to the non-observance of the instruction manual, or
normal wear and tear. No guarantee claims will be accepted if the appliance has been
modified or if attempts have been made to repair the appliance. In such case, the vendor
cannot be held responsible in case of accidents.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
8
Assembly page 8/16
on the
SC VT 801 - 111209
Publicité
