Publicité
4.4. USE BLUETOOTH MODE
4.4.1. PAIR A DEVICE
1.
Set the speaker to work in Bluetooth mode. The speaker will enter pairing
mode if it cannot reconnect to a Bluetooth device.
2.
On your Bluetooth device, turn on the Bluetooth function, locate the
available Bluetooth device list, and select the device named "Q.1113" to
pair and connect the speaker. If your device prompts you for a passcode,
enter "0000" (four zeros). When the pairing is complete, the speaker moves
to the list under "Paired devices" and its status becomes "Connected".
3.
You can now use the speaker with your Bluetooth device.
Note: The speaker will automatically reconnect to the last connected device
when the following are all true.
•
The two devices are on.
•
The two devices are within range of each other.
•
The last connected device's Bluetooth is on.
4.4.2. DISCONNECT A DEVICE
To disconnect the speaker from the connected Bluetooth device, press and hold the Mode button
( ) for 3 seconds. After the disconnection, the speaker will reenter pairing mode and allow you
to connect it to another Bluetooth device.
4.5. CONTROL MUSIC PLAYBACK
When playing music in USB, microSD (TF), or Bluetooth mode, you can control the playback in
the following ways.
•
Press the Play / Pause / TWS mode button ( ) to start, pause or resume playing music.
•
Press the Previous track / Play recording button ( ) to go back to the previous track.
•
Press the Next track / Start recording button ( ) to go to the next track.
•
Turn the Volume knob to adjust the volume.
4.6. USE TWS MODE
If you have two Q.1113 speakers, you can activate True Wireless Stereo (TWS) mode and enjoy
music in stereo sound.
1.
Ensure the speakers have no connection with other devices.
2.
Power on both speakers. Then press and hold the Play / Pause / TWS mode button ( )
on either speaker for 3 seconds. The two speakers will make connection by themselves
automatically and you will hear a tone once it's done.
3.
Follow the steps in "4.4.1. PAIR A DEVICE" to pair and connect your Bluetooth device with
the speakers.
4.
You can now use the speakers with your Bluetooth device.
Tips:
•
In TWS mode, you can control music playback using the buttons on either speaker.
•
To exit TWS mode, press and hold the Play / Pause / TWS mode button ( ) on either
speaker for 3 seconds.
4.7. USE FM MODE
1. Set the speaker to work in FM mode. The screen displays "XX.XX".
2. Long press the Play / Pause / TWS mode button ( ) to start searching for and saving FM
radio stations automatically. When this is complete, the speaker will tune in to the first radio
station it found.
3. Press the Previous track / Play recording button ( ) or Next track / Start recording button ( )
to change the radio station.
4.8. USE USB MODE
You can connect a USB flash drive to the USB-A port on the top of the speaker and play music
stored on the drive.
7
EN
BLUETOOTH
Bluetooth
Q.1113
Connected
Publicité
