Getting Started - Impecca ACW-1674 Mode D'emploi

GETTING STARTED

BEFORE STARTING
Your ACW-1674 4K Ultra HD Action Camera with WiFi® requires a
UHS-1 type 10 microSD card to store video and images (sold sepa-
rately). Your camera supports microSD cards up to 64GB. Purchase
a microSD card before proceeding with these instructions.
CHARGING THE CAMERA
Your Action Camera is powered by a rechargeable Li-Ion battery
that must first be charged before using the device.
You'll need to charge your Action Camera before first use. To charge
your Action Camera, connect one end of the USB cable to the USB
port on the camera. Connect the other to a standard smartphone
wall charger or other USB-powered connection.
TURNING THE ACTION CAMERA ON AND OFF
To turn on your Action Camera, press and hold the Power/Mode
button on the front of the camera. The blue Status Indicator LED on
the top of the camera illuminates, and the screen turns on.
To turn your camera off, press and hold the Power/Mode button on
the front of the camera until the blue Status Indicator LED turns off.
The camera also turns off automatically after 3 minutes of inactivity.
BEFORE FIRST USE: INSTALL AND FORMAT THE
MICROSD CARD
1. Turn the Action Camera on.
2. Insert the microSD slot into the slot on the side of the camera.
3. Press the OK button on the top of the camera.
4. A prompt appears on the camera screen asking to format the
microSD card. Use the camera Up/Down button to select Con-
firmation in the prompt. The microSD card is then formatted.
5. Once the microSD format completes, your Action Camera is
ready to use.
9