Publicité
Unpacking
Carton Contents
• Funnel cover
• Funnel
• Motor housing
• Upper frame (x2)
• Lower frame
• Feet (x2)
• Thread forming screws (x4)
• Frame knob (x2)
• Bolt (x2)
• Wheels (x2)
• Hub caps (x2)
• Axle
• Washers (x4)
• Cotter pins (x2)
• Additional cutting lines (x20)
• Clean-out tool
• Manual
1. Carefully remove the electric leaf mulcher + shredder and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center at 1-866-
225-9723.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the mulcher + shredder.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to the power supply until
assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
1. Insert the axle through both sides of the lower frame
(Fig. 1).
2. To assemble the wheels, first place a washer over the end
of the axle. Then place a wheel and another washer, before
inserting a cotter pin through the holes on end of the axle.
Bend the legs of the cotter pin to secure it to the axle.
Finally, snap the hub cap onto the wheel and repeat the
procedure for the other side (Fig. 2).
Fig. 2
Cotter pin
Wheel
Axle
7
Lower frame
Axle
Washer
Washer
Hub cap
Cotter
pin
Fig. 1
Publicité
