Set time delay
Here you can program how long the keypad should remain locked after 3 incorrect code entries. Proceed as follows:
Set opening time
Here you can program for how long the hook should be withdrawn when releasing Proceed as follows:
Set language
To program the language, proceed as follows:
Set text
To program the text displayed after the key release, proceed as follows:
Set buzzer
To switch the signal tone on or off when pressing a key, proceed as follows:
•
Set time delay
•
Press OK
•
The display shows: 1 min
•
Use the arrow keys and to choose the time delay between 0 min, 1 min, 5 min. and 15 min.
•
Press OK at the chosen time delay
•
The display shows: Time delay set
•
The time delay is programmed
•
Set opening time
•
Press OK
•
The display shows: 2 sec.
•
Use the arrow keys and to set the opening time at 1 sec, 2 sec., 5 sec. and 10 sec.
•
Press OK at the chosen time delay
•
The display shows: Opening time set
•
The opening time is set
•
Set language
•
Press OK
•
The display shows: German
•
Use the arrow keys and to choose between German, French, English and Italian
•
Press OK at the chosen language
•
The display shows: Language set
•
The language is programmed
•
Set text
•
Press OK
•
The display shows the chosen text
•
Use the arrow keys and to switch between 4 different texts
•
Press OK at the chosen text
•
The display shows: Text set
•
The text is programmed
•
Set buzzer
•
Press OK
•
The display shows: On
•
Use the arrow keys and
•
Press OK at the desired selection
•
The display shows: Buzzer set
•
The signal tone is programmed
to switch between On and Off
11