Power on
When the robot runs out of battery, it will
2.
automatically stop at the edge of the pool unless
unforeseen obstacles prevent the robot from moving to
the pool's edge.
Note:
It is recommended to turn off the filtration system as the water circulation in the pool may affect the
robot's mo
Any obstacle in the swimming pool can affect the robot's cleaning pattern, such as ladder.
If you are using salt to sanitize you water, make sure it is dissolved before putting the robot into the water.
Debris Access & Disposal
1.
5.
1. Press the on/off button located under
2.
the cleaner until the button lights up.
Hold the robot horizontally under the
water for approximately 20-30
seconds. The robot should sink freely
down to the bottom of the pool.
3.
o
p
3.
4
4.