Publicité
STEP 3
1. Attach 2 blocks (5) to right side panel (3) by inserting 4 screws (I) through holes on blocks (5), then
tighten to right side panel (3).
STEP 4
1. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
2. Attach upper rear cross bar (6) and shelf (8) to left side panel (2) by inserting wood dowels (C)
into wood dowel holes on upper rear cross bar (6) and inserting cam bolts (A) into cam bolt holes
on shelf (8).
3. Insert 2 cam locks (B) into cam lock holes on shelf (8), then rotate clockwise to secure cam bolts
in
place.
I I
5
2
C
B
8
B
I I
5
3
C
6
Publicité
