Specifications
Power:
120V, 60Hz, 35W
Size:
22" x 11.25" x 11.5" / 56cm x 28cm x 29cm
Lens:
High-impact polycarbonate
Light Intensity:
10,000 LUX at 12"/30cm
Light Source:
168 LED Bulbs, 3000K, 100% UV Free
Angles:
Adjustable
Light Therapy Basics
LUX or the light intensity at a specific
distance from the light is the common
term used in bright light therapy. The
chart below details the average treatment
times for the Winter Blues based on your
eyes proximity to the lamp.
DISTANCE
SESSION TIME
12"/30cm
30 minutes
18"/45cm
60 minutes
24"/60cm
120 minutes
Lamphead
Adjustment knob
Arm
Lamp base
Assembly Instructions
1. On a level, solid surface lay out the lamphead/arm,
the lamp base and the 2 Philips screws for assembly.
2. Position the lamphead/arm on its side.
3. Carefully and firmly insert the bottom of the
lamphead/arm into recess on the lamp base
in the orientation shown.
4. Insert and by hand seat the Philips screws
through the holes on the bottom of the lamp base.
5. Using the Philips screwdriver, hand-tighten the
screws until snug – be careful not to overtighten.
6. Stand the lamp upright.
7. While holding the lamphead with one hand, with the other, turn
the angle adjustment knob to loosen the lamphead, position
to the desired angle and re-tighten the adjustment knob.
8. Plug the lamp into a standard 120V electrical outlet
9. Use the on/off touch button to turn the lamp on. Press "+" to
increase the brightness and press "-" to lower the brightness.