Connecting The Aerial And Vcr; Stabilizing The Tv Set - Sony KE-P37XS1 Mode D'emploi

Connecting the Aerial and VCR

• Use the supplied mains lead (Type C-4, Type BF or Type C-5, see page 9).
• Use the supplied coaxial cable for aerial connection.
VCR
OUT IN
For more details regarding VCR connection, refer to
"Connecting Optional Equipment to the TV" on
page 38.

Stabilizing the TV set

After setting up, secure the TV set to a wall, pillar, etc, using the supplied anchor attachments, for safety
purposes.
1
Remove the two screws attached to the upper rear side
of the TV set.
2
Replace the two screws with the two supplied anchor
attachments.
3
Secure a wall anchor bracket (not supplied) to a solid wall or
pillar.
4
Pass a strong cord or chain through both holes of the anchor
attachments and then secure to a wall or pillar, etc.
14
Overview & Installation
or