Télécharger Imprimer la page

Kenwood CR-ST100S-S Notice D'emploi page 47

Publicité

8.3 Playlist
You have the option to create a playlist for your MP3 files. 200 memory locations are available for
this. To save a track in the playlist, press the <OK> button in the track list until "Added to My play-
list" appears in the display. The track is now saved in the playlist. To play the list, press the <MENU>,
button, select "Playlist" and confirm the desired track.
The random play and repeat functions are also available.
You can delete the current playlist by executing the "Clear My playlist" function in the "Menu". If
you confirm "Remove all from My playlist" with "YES" the list is deleted. Individual tracks cannot
be removed from the playlist.
Note: If there are tracks in the playlist that are not on the current USB stick, the playback is aborted
with the error message "Cannot open selected media.". Then press the <MENU> button to delete
the error message. Create a new playlist.
9. Digital radio DAB+
To receive the digital radio DAB+, please switch to the source"DAB Radio" in the main menu. When
switching for the first time, an automatic station search is started. The "Scan" appears on the display,
as well as the number of stations found so far and a corresponding progress bar.
Some stations offer additional information as a so-called Slideshow.
To display these on the radio display in large format, press the <OK> button on the remote control or
on the radio. Pressing the button again switches the display back.
9.1 Station search
To search for receivable stations, you can start an automatic search. To do this, use the <MENU> but-
ton to open the menu and select "Scan". The "Scan" appears on the display, as well as the number
of stations found so far and a corresponding progress bar. The stations are then saved in alphabetical
order.
Stations that were found during a previous search but cannot currently be received are shown in the
station list with a "?" in front of the station name.
9.2 Manual tune
You can also set ensembles manually. To do this, use the <MENU> button to call up the menu and
select "Manual tune". Then select the desired station and confirm with <OK>. Now information ab-
out the ensemble and the signal strength are displayed. Another pressing of the <OK> button saves
the corresponding stations in the list.
15

Publicité

loading