ADB SWING 6 Manuel D'utilisation page 5

SWING 6
SWING 12
Power Supply
Lighting Technologies
The SWING 6 is a six channel lighting desk which outputs
data using the DMX512 (1990) protocol.
The six faders of the Swing 6 correspond to the first six
channels of the DMX512 output. When a fader is positioned
at the bottom of its travel, the DMX512 output will be 0.
When the fader is positioned at the top of its travel, the
output will be 255.
The SWING 12 is a two preset, twelve channel lighting desk
which outputs data using the DMX512 (1990) protocol.
The two presets allow the creation of two output settings
on two different banks of faders, Preset A and Preset B.
Either or both presets may be output from the desk with the
highest value of each channel taking precedence.
The output level of each preset is determined by the two
master faders labelled A and B. The B master fader is
reversed such that both master faders may be moved
together to crossfade between the presets. The overall
output of the desk is controlled by the fader labelled Master.
SWING 6 and 12 are powered by an external 9 VDC power
supply. The power input may be connected to either the
5.5 mm jack socket or to pins 4 and 5 of the DMX512
connector.
SWING 6 & 12
5