Pequignet Royal Manuel D'instructions page 32

SETTING OF WATCH
WITH DATE
Winding
Crown Position 1
40 turns of the crown are needed to guarantee a complete winding of
the barrel and so the 65-hour power reserve. Although, twenty turns of
the crown are enough as the Calibre Initial has a very efficient automatic
winding system.
Setting of the date
Crown in position 2
Beforehand, the time has to be set as explained below with crown in position
3. Then, turn the crown anticlockwise, the rapid correction system enables to
flash up the dates on the dial easily. When the date is synchronized, put the
crown back in position 1.
Setting of the time
Crown in position 3
Turn the crown in position 3 to move the hand in a sense or another in order to
set the time of your watch. When the crown is in position 3, the seconds' hand
stops. When the hour is synchronized, put the crown back in position 1.
1 2 3
32