Publicité
Les langues disponibles
Les langues disponibles
Tool and Supplies Needed:
•
Bag of fine sand
•
Funnel
•
Hammer (optional)
1.
Install one (1) of the two (2) End Caps (found in a plastic bag stapled around a Hook Arm) in one end of the Striper
Roller (Figure 3).
The End Cap fits snugly so you may have to gently tap it in with a Hammer.
TIP
2.
Stand the Roller on the end with the End Cap installed and fill the Roller through the opposite hole in the Roller with
fine sand using a Funnel and then install the second End Cap.
3.
Insert the Hooks into the Slots provided at the rear of the Mower (Figure 2 on the previous page).
TIP
For ease of inserting the Hooks, hold the Roller Arms up against the Handlebars.
4.
After inserting the Hooks, lower the Striper Roller to the ground (Figure 4), attach the Bagger or insert the Mulching
Plug, and simply create the lawn pattern of your choice as you mow!
TIP
See Figure 5 for some examples of lawn patterns you can create with your new Striper Roller.
End Cap installed
Figure 3
NEUTON MA 5.6 Striper Roller -
All manuals and user guides at all-guides.com
Figure 5
Safety & Operating Instructions
Hooks
in Slots
Figure 4
3
Publicité
