Uni-bond E-905A Mode D'installation

Wiring Information
Wire Colour Function
Red Power
Black Ground
Yellow Pattern Selection
Surface Mount: 2 Holes @ 5
Light should be fused with 5 Amp Fuse
Pattern Selection
Tap yellow wire (Pattern Selection) to Power momentarily to change patterns. (see Flash Patterns)
To return to pattern NO. 1, touch the yellow wire to Power quickly 3 times.
NOTE: This unit may not be factory-set to Flash Pattern NO. 1
Flash Patterns
NO. Flash Patterns
1 Double Flash (2Hz)
2 Single Flash (2Hz)
3 Triple Flash (2Hz)
4 Quad Flash (2Hz)
5 Random
6 Steady Light
7 Single Flash
8 Mega Flash
Suggested Switch Connection
Battery Ground
Ground
Power
Pattern Selection
Mounting Options
Universal Bracket
For more information, visit our website at: www.unibondlighting.com
INSTALLATION MANUAL
/ " centres
1
2
(ATM05 sold
SAE
Class 1, CA13
(switches sold separately)
(brackets included)
mounting brackets
E-905A LED Warning Lights
For 12V to 24V DC Applications
Connect To
+12/24 VDC (Power)
- (Ground)
+12/24 VDC (Power)
separately)
NO. Flash Patterns
9 Double Flash
10 Triple Flash
11 Quad Flash
12 Quint Flash
13 Ultra Flash
14 Single / Quad Flash
15 Single / High Intensity Flash
16 Single / Triple / Quad Flash
From Battery Positive
Jumper Wires
Switch #1
ST307
(OFF-ON-Momentary ON)
For Synchronizing 2+ Lights
(
refer to Synchronization Manual
L Bracket (
Front
SAE
Class 1
Class 1
Class 1
Class 1
Class 1
)
) L Bracket (
Last Updated: 09/22/2022
)
Rear