Chicago Pneumatic CP 0122 SVR Prescriptions De Sécurité Et Instructions Pour L'opérateur page 15

CP 0122 SVR, CP 0125 SVR
CP 0122
1. Place the retainer over the hex body of the chisel.
2. Place the buffer (A) over the stem of the chisel.
3. Insert the chisel shank into the cylinder and
screw the retainer onto the cylinder until it is
locked into position by the retaining lock ring.
CP 0125
1. Slide the conical buffer (A) onto the chisel from
the nose end of the chisel.
2. Slide the retainer onto the chisel from the nose
end of the chisel.
3. Screw the retainer onto the cylinder.
4. Ensure that the retainer is locked into position
by the retaining lock ring.
Operation
WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
► Stop the machine immediately in all cases of
power supply interruption.
9800 0834 90b | Original instructions
All manuals and user guides at all-guides.com
Safety and operating instructions
Start and stop
Start the machine by squeezing the trigger while
firmly holding the handle.
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.
Operating
Starting a cut
♦ Stand in a stable position with your feet well away
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
15