Headwave TAG Mode D'emploi page 6

All manuals and user guides at all-guides.com
English
Mounting Headwave TĀG
Identify area on the back the helmet, close to the center,
both vertically and horizontally.
Clean this area - It must be free from oil, dust and humidity upon mounting.
Remove the backing of the mounting tape already preattached
to Headwave TĀG. Gently place Headwave TĀG in the horizontal
position against the identified area. Please make sure that
the entire product is firmly affixed to your helmet.
Depending on your helmet's curvature, the edges may not
be flush against the helmet's surface. If so, gently push on
each side until the edges are firmly affixed. TĀG is designed to
accommodate some flexing, so don't worry about damaging it.
4