Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
SPECIFICATIONS
(OUTDOOR USE)
CASTER ROLLER
INSTALLATION
Fig.1
4x
2x
Fig.3
a) Tilt the unit on it's back on level ground and remove the 4 cabinet
legs (Fig.3 number 4). Reserve the cabinet legs.
b) Assemble the casters with brake (Fig.3 number 1) on the cabinet
front bottom and the other 2 casters (Fig.3 number 2) at the
cabinet rear bottom.
c) Assemble each caster to the bottom of the unit with (2) M5x10
screws with a star or Phillips screwdriver (Fig.3).
d) The caster brake (Fig.3 number 1) at the front bottom of the
cabinet comes with a braking function. When brake handle is
"ON" (Fig.2) unit wont roll, when brake handle is "OFF"
(released) it will roll. (Fig.2)
INSTALLATION INSTRUCTIONS
Fig.2
2x
8x
WARNING
• Unplug the powercord and release the brake before
moving the cabinet.
• Do not put any goods on top of the cabinet and avoid
slanting the cabinet when moving it.
• Push the cabinet from the rear making sure the door
does not open.
• Please do not use the cabinet in bad weather to avoid
short circuits. Position the cabinet under a canopy.
• Do not let children climb into the cabinet or
move the cabinet to another location.
• Keep the caster brake in "ON" position while in
desired location.
• The cabinet must be put on a level ground.
• The cabinet will reach its optimum cooling effciency
after one hour.
4
Publicité
