Contrôle De La Partie Module - Yoctopuce Yocto-Temperature-IR Mode D'emploi

#!/usr/bin/python
# -*- coding: utf-8 -*-
import os, sys
from yocto_api import
from yocto_temperature
def usage():
scriptname = os.path.basename(sys.argv[0])
print("Usage:")
print(scriptname +
print(scriptname +
print(scriptname +
sys.exit()
def die(msg):
sys.exit(msg +
errmsg = YRefParam()
if len(sys.argv) <
usage()
target = sys.argv[1]
# Setup the API to use local USB devices
if YAPI.RegisterHub("usb", errmsg) !=
sys.exit("init error"
if target == 'any':
# retreive any temperature sensor
sensor = YTemperature.FirstTemperature()
if sensor is None:
die('No module
else:
sensor = YTemperature.FindTemperature(target +
if not (sensor.isOnline()):
die('device not
# retreive module serial
serial = sensor.get_module().get_serialNumber()
# retreive both channels
channel1 = YTemperature.FindTemperature(serial +
channel2 = YTemperature.FindTemperature(serial +
while channel1.isOnline():
print("Ambiant: "
"%2.1f"
" deg C (Ctrl-C to
YAPI.Sleep(1000)
YAPI.FreeAPI()
8.4. Contrôle de la partie module
Chaque module peut-être contrôlé d'une manière similaire, vous trouverez ci-dessous un simple
programme d'exemple affichant les principaux paramètres d'un module et permettant d'activer la
balise de localisation.
#!/usr/bin/python
# -*- coding: utf-8 -*-
import os, sys
from yocto_api import
def usage():
sys.exit("usage: demo <serial or logical name>
www.yoctopuce.com
*
import *
' <serial_number>')
' <logical_name>')
' any ')
' (check USB cable)')
2:
YAPI.SUCCESS:
+ errmsg.value)
connected')
connected')
+ "%2.1f / Infrared: "
% channel2.get_currentValue()
stop)")
*
8. Utilisation du Yocto-Temperature-IR en Python
'.temperature1')
'.temperature1')
'.temperature2')
% channel1.get_currentValue()
+ \
[ON/OFF]")
+ \
39