Publicité
Liens rapides
Model/Modelo/Modèle
3575
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
54177
You may need/Usted puede necesitar/
Articles dont vous pouvez avoir besoin:
54177
1
TWO HANDLE WIDESPREAD
LAVATORY FAUCETS
LLAVES DE LAVAMANOS
EXTENDIDAS DE DOS MANIJAS
ROBINETS À ENTRAXE LONG À
DEUX POIGNÉES POUR LAVABO
T E FLO N
T E FLO N
3/32" (2.38mm)
3/32" (2.38mm)
1/31/12
Rev. C
Publicité
Manuels Connexes pour Delta 3575 Serie
Sommaire des Matières pour Delta 3575 Serie
- Page 1 • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: 3/32" (2.38mm) • LEER TODAS las instrucciones completamente antes de empezar.
- Page 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
- Page 3 RP43169▲ RP38368▲ RP48885▲ Lift Rod Finial End Valve Assembly-WF Spout Assembly Pomo de la barra Ensamble de la Válvula Final Ensamble del Tubo de Salida de alzar Embase avec Joint Soupape Grain de la Tirette RP6060, RP6060SB Bonnet Nuts Bonetes/Capuchones RP52216 Chapeaux Filetés Aerator...
- Page 4 RP38958 Pop-Up Assembly Less Lift Rod Ensamble del Desagüe Automático sin la barra para alzarlo Renvoi mécanique sans la tirette RP5648 Stopper Tapón Bonde Metal Flange Brida de Metal RP12516 Collerette en métal Strap & Screw Barra Chata y Tornillo Feuillard et Vis RP6142 RP33038...
- Page 5 Slide hot (1) and cold (2) end valves with gaskets (3) through sink. Snap the quick connect hose assembly (1) onto the spout nipple (2) Note: hot side end valve is labeled (4)! Secure end valves with nuts and end valve nipples (3). An audible click will be heard. Pull and washers (5).
- Page 6 Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull Remove stopper (1), brass nut & washer (2), Remove pivot nut (1). Install horizontal rod (2) pop-up straight down into drain hole and black gasket (3) and tail piece (4). and stopper (3) as removable (4) or secure gasket (2), brass nut and washer (3).
- Page 7 Step 3b Step Metal Pop-up Step 3c Apply silicone to underside of flange (1). Insert Remove stopper (1) and flange (2). Remove pivot nut (1). Install horizontal rod body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or Screw nut (1) all the way down.
- Page 8 1/2" (13 mm) IPS Make Connections to water lines: Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (4) Choose hook-ups for 1/2" I.P.S. connections: and flush water lines for one minute.