TOPTRO TR27 Manuel De L'utilisateur page 19

4.Connect to DVD Player
1. Turn on your DVD player and the projector.
2. Connect to the DVD Player and the projector with the HDMI
cable.
3. Enter the home page to select the corresponding HDMI as
the signal source.
Note:
When the projector is connected to the DVD player via
the HDMI cable, if there is no sound, it may be that the output
signal of the HDMI port of the DVD player is not compatible
with HDCP, please try to connect your speaker.
5.Connect to Computer
1. Connect to the computer and TR27 projector with the HDMI
cable.
2. Select the HDMI source to project any files on your computer.
3. On your laptop, hold down the key "Win+P" board keys to
change your display mode.
NOTE:
For MacBook, Use a Type C to HDMI adapter to connect
your MacBook, or a Mini Display to HDMI adapter to connect
with your MacBook Air (adapter not included).
1. Computer only: This is the default option and will display
the screen only on the main monitor.
service@toptro.com
EN
19
EN