Publicité
Les langues disponibles
Les langues disponibles
3
Connections
PC connection input
Male USB
Integrated
connector
protection cap
5
Recorder fuction
The KISTOCK allows to record the values measured instantaneously, it records the values according to
a predefined interval.
On the other hand, it is possible to operate continuously the KISTOCK thanks to a loop recording.
3 types of dataset start
The measurement dataset can be launched:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
6 types of dataset stop
You can stop your dataset:
• According to a date and time (if it was started the same way)
• According to a recording duration
• According to a predefined number of recording points
• If the storage capacity of the memory is full
• With "Stop" option of the software
• By holding "OK" key during about 5 seconds, if this function has been previously activated by the
software.
6
Mounting
The KISTOCK data loggers have a magnetic mounting,
so you can fix it easily.
1.
Magnetic mounting
2.
Battery cover
3.
Locking sign of the battery cover
7
Replace the battery
With 500 days to 3 years* of battery life, KISTOCK devices guarantee long-term measurements.
To replace the battery:
• Unlock the battery cover.
• Insert the battery (CR 2450 button battery**) with the + pole visible.
• Replace the battery cover with the indicator in front of the opened padlock and close it by tur-
ning it towards the right in order to make correspond the indicator with the closed padlock.
*Non-contractual value. Based on 1 measurement each 15 minutes at 25 °C. A correct operation of the device and the storage conditions
must be respected.
**The battery must be in compliance with the IEC 60086-4 standard.
1
3
2
Publicité
