Télécharger Imprimer la page

Danby Premiere DPAC 10099 Guide D'utilisation Et Soins De Propriètaire page 9

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS (cont'd)
DEHUMIDIFIER
1) Press the ON/OFF key pad to switch the unit
on (Fig. A)
2) Press the MODE key (Fig. B) until the DRY
indicator illuminates on the control panel (Fig.
G).Each press of the MODE key will advance to
a different mode setting (Cool-Dehumidifier-Fan).
3) If room temperature is 25°C (77°F), fan speed can be adjusted. Press the Fan key (Fig. E)
to select the desired FAN SPEED setting. Your selection will appear on the contol panel. Each
depression of the fan key will advance to a different fan speed (High- Med.- Low) as shown in
Fig. F. Otherwise, fan speed is fixed to "low".
Note: The warm air exchange hoses must vent inside the room when using Dehumidify Mode,
not outside as it does when cooling.
Fig. G
Fig. J
NOTE: During Fan Mode, the exhaust hose does not have to be vented
FAN
outdoors.
1) Press the ON/OFF key pad to switch the unit on (Fig. H).
2) Press the MODE key (Fig. H) until the FAN indicator illuminates on the control panel (Fig.
J). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-
Fan).
3) Press the FAN Key (Fig. K) to select the desired FAN SPEED setting. Your selection will
appear on the control panel. Each press of the fan key will advance to a different fan speed
(High- Med- Low) as shown in Fig. L.
All manuals and user guides at all-guides.com
Note: During dehumidifier mode, the exhaust hose does not have to
be vented outdoors.
Fig. H
Fig. K
IMPORTANT: The drain
hose must be installed
during dehumidifier mode.
Drain Hose (79" / 200cm)
Fig. I
Fig. L
8

Publicité

loading