Blackstone OMNIVORE 1813AZ Manuel D'utilisation page 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Place the griddle top onto the griddle body by aligning the
STEP 02
four pins to the holes of the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❷ ❷
❶ ❶
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Use the two (2) M6 bolts pre-installed in the handle to attach
STEP 04
the handle and bezels to the hood�
06
Removed the two (2) pre-installed bolts from the
STEP 03
hood handle�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Install the two (2) control knobs by pushing them into place
STEP 05
in the oFF position�
Model: 1813AZ
BLACKSTONEPRODUCTS.COM/SUPPORT