Audizio RP335 Manuel D'instructions page 6

1. Press the mode button to select BT mode.
2. Turn on the BT-function on your mobile phone or tablet, search for "Audizio RP335" and initiate pairing. When pairing is
successful, the record player will emit a sound. You can now play your music from your mobile phone or tablet.
3. Rotate the volume control to adjust the volume (the volume control of the mobile phone or tablet can also affect the total
volume).
4. Press previous or next to change tracks.
5. Press play/pause to (re)start or pause playback.
6. Double press play/pause to disconnect. Again, a sound will be emitted to confirm the disconnecting has been successful.
Note: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker.
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Rotate the volume knob to just above the minimum level and turn on the power.
3. Insert a USB storage device to start playback. It's also possible to manually start USB mode by pressing the mode button.
4. Press previous or next to change tracks. Double press to select the previous or next folder (on USB storage device).
5. Press play/pause to (re)start or pause playback.
Press and hold to put the device in standby mode.
1. Insert a USB storage device in the USB port.
2. Place a record on the platter or connect a BT device.
3. Switch to Phono- or BT mode respectively, by pressing the mode button.
4. Press and hold the mode/rec button for about 2 seconds to start recording. A beep sound will be emitted.
5. To finish recording, again press and hold the mode/rec button for about 2 seconds. Two beep sounds will be emitted.
The recorded songs will be stored within the "RECORD" folder on your USB storage device.
6. To erase/delete tracks from the USB storage device, press and hold mode/rec for about 2 seconds. The first recorded file
will play. Double press play/pause to erase/delete the file. A beep will be emitted.
Connect the supplied speaker system to the RCA port of the record player.
6