Publicité
Liens rapides
Owner's Instruction and Operation Manual
Model Number:
5502M
Report Number: F20-570
Certified to ASTM E1509-12 (2017)
and ULC-S627-00-REV1
Mobile Home Approved
* All Pictures In This Manual Are For Illustrative Purposes Only. Actual Product May Vary.
Save These Instructions In A Safe Place For Future Reference.
SAFETY NOTICE: If this heater is not properly installed, a house fire may result. For
your safety, follow the installation instructions. Never use make-shift compromises
during the installation of this heater. Contact local building or fire officials about
permits, restrictions and installation requirements in your area. NEVER OPERATE
THIS PRODUCT WHILE UNATTENDED.
CAUTION! Please read this entire manual before you install or use your new room
heater. Failure to follow instructions may result in property damage, bodily injury,
or even death. Improper Installation Will Void Your Warranty!
U.S. Environmental Protection Agency
Certified to comply with 2020 particulate
emissions standards.
THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE.
© 2021 United States Stove Company, 227 Industrial Park Rd., South Pittsburg, TN 37380
R
CALIFORNIA
WARNING:
This product can expose you to chemicals including
carbon monoxide, which is known to the State of
California to cause cancer, birth defects, and/or other
reproductive harm. For more information, go to
P65warnings.ca.gov
852046M-2204J
PROPOSITION
65
www.
Ph. 800-750-2723
Publicité
Manuels Connexes pour United States Stove KING 5502M
Sommaire des Matières pour United States Stove KING 5502M
- Page 1 California to cause cancer, birth defects, and/or other emissions standards. reproductive harm. For more information, go to www. P65warnings.ca.gov THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. © 2021 United States Stove Company, 227 Industrial Park Rd., South Pittsburg, TN 37380 Ph. 800-750-2723...
- Page 2 This app is available only Text to 423-301-5624 or; on the App Store for iPhone and iPad. Email us at: Search US Stove. Save your receipt with customerservice@usstove.com your records for any claims. © 2021 United States Stove Company...
- Page 3 Declaration of Completion: As the qualified person responsible for the work described above, I confirm that the appliance as associated work has been installed as per manufacturer’s instructions and following any applicable building and installation codes. Signed: ______________________________________ Print Name: __________________________________Date: ______________ Home Owner: RETAIN THIS INFORMATION FOR FUTURE REFERENCE © 2021 United States Stove Company...
- Page 4 Freestanding Unit - supported by pedestal/legs and BURNING FUEL CREATES CARBON MONOXIDE placed on a non-combustible floor surface in compliance AND CAN BE HAZARDOUS TO YOUR HEALTH IF with clearance requirements for a freestanding stove NOT PROPERLY VENTED. installation. © 2021 United States Stove Company...
- Page 5 For safety reasons, please adhere to the installation clearances and restrictions. Any reduction in clearance to combustibles may only be done by means approved by a regulatory authority. © 2021 United States Stove Company...
- Page 6 The maximum recommend vertical venting height is 12- the floor of the home. feet for 3-inch type “PL” vent. Total length of horizontal © 2021 United States Stove Company...
- Page 7 Vent surfaces can get hot enough E. Minimum 2-foot (0.61m) clearance above any grass, to cause burns if touched by children. Noncombustible plants, or other combustible materials. shielding or guards may be required. © 2021 United States Stove Company...
- Page 8 This appliance is certified for use with listed 3 inch or 4 inch of vertical venting. An approved vertical vent cap is “PL” pellet venting products. The use of other components recommended. other than stated herein could cause bodily harm, heater damage, and void your warranty. © 2021 United States Stove Company...
- Page 9 The “through the wall” installation is the least expensive and simplest installation. Never terminate the end vent under a deck, in an alcove, under Exhaust Pipe Fresh Air Intake a window, or between two windows. We recommend © 2021 United States Stove Company...
- Page 10 If this situation continues, the fuel in the burn pot -10- © 2021 United States Stove Company...
- Page 11 See the list of button is pressed. The fan will automatically adjust its error codes found at the end of this manual. speed in accordance to the heat range setting. However, -11- © 2021 United States Stove Company...
- Page 12 T’Stat requires more heat, the unit will begin to feed pellets at the preselected heat setting ranging from “1” to “5”. Use 18 gauge, 2 conductor wire -12- © 2021 United States Stove Company...
- Page 13 INTO AN ELECTRICAL OUTLET. THESE MOVING PARTS MAY BEGIN TO MOVE AT ANY TIME Your pellet stove is designed to burn premium hardwood WHILE THE STOVE IS PLUGGED IN. pellets that comply with the Pellet Fuels Institute (PFI) -13- © 2021 United States Stove Company...
- Page 14 HOPPER DROP BELOW 1/4 FULL. the “Heat Level Advance” button. If the fire doesn’t start in 12 minutes, press “On/Off”, wait a few minutes, clear the burn pot, and start the procedure again. -14- © 2021 United States Stove Company...
- Page 15 “E2” on the two digit display. The stove has to fully shut down before restarting. INTERIOR CHAMBERS • Burn Pot - Periodically remove and clean the burn pot -15- © 2021 United States Stove Company...
- Page 16 CO monitors the top as well as from the bottom. The creosote should in areas having the potential to generate CO. -16- © 2021 United States Stove Company...
- Page 17 5. Re-install the retainer and eight nuts and rope gasket Hopper (end of Empty & using high-temperature silicone to adhere the gasket season) Vacuumed to the door. 6. Never use substitute materials for the glass. -17- © 2021 United States Stove Company...
- Page 18 ATTENTION: THIS WOOD HEATER NEEDS PERIODIC INSPECTION AND REPAIR FOR PROPER OPERATION. IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT WITH OPERATING INSTRUCTIONS IN THIS MANUAL. -18- © 2021 United States Stove Company...
- Page 19 FACTORY DEFAULTS To return the control to its original factory default settings, press and hold the AUX UP and AUX DOWN buttons together for three seconds. -19- © 2021 United States Stove Company...
- Page 20 REPAIR PARTS -20- © 2021 United States Stove Company...
- Page 21 Pressure Switch 89586 Nipple IN ORDER TO MAINTAIN WARRANTY, COMPONENTS MUST BE REPLACED USING ORIGINAL KING PARTS PURCHASED THROUGH YOUR DEALER OR DIRECTLY FROM KING. USE OF THIRD PARTY COMPONENTS WILL VOID THE WARRANTY. -21- © 2021 United States Stove Company...
- Page 22 Part numbers and descriptions can be found in the “Repair Parts” section of this manual. Once this information has been gathered you can contact customer service by phone 1-800-750-2723 Ext 5051 or Email parts@usstove.com. Model Information Model Number Serial Number -22- © 2021 United States Stove Company...
- Page 23 Engineer Name: ____________________________________ License No.: ________________________________________ License No.: ________________________________________ Company: __________________________________________ Company: __________________________________________ Telephone No.: _____________________________________ Telephone No.: _____________________________________ Stove Inspected: Chimney Swept: Stove Inspected: Chimney Swept: Items Replaced: ____________________________________ Items Replaced: ____________________________________ -23- © 2021 United States Stove Company...
- Page 24 NOTES -24- © 2021 United States Stove Company...