Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION
POWER SUPPLY
Please use the attached power, note that power voltage and frequency are the same as the marked voltage and
frequency of device when connecting power. Every device's power should be connected separately, so that de-
vice can be controlled individually.
CABLE SPEC.
CABLE (EU)
CABLE (US)
PIN
Brown
Black
Live
Light blue
White
Neutral
Yellow/Green
Yellow/Green
Earth
DMX CONNECTION
Connection between lights and DMX must use the shied cable of diameter more than 0.5mm. Please use the
attached 3 pin XL plug/socket to connect the DMX output/input interface. The connection between socket and
cable as below (note the plug/socket's 3 pin number and position).
DMX-OUTPUT
XLR mounting-sockets (rear view)
1 ∙ Shield
2 ∙ Shield (-)
2
1
3 ∙ Shield (+)
3
When using standard DMX512 control signal, the last device's output interface must be connected to a DMX plug.
This plug is putting a 120 ohm resistance between "canon" plug's 2 pin and 3 pin. Showing as below pic. Sticking
this plug into the last device's signal output interface, it will avoid the interference during the process of signal
transmission.
RIGGING
Attention! The installation must be carried out by qualified service personal only. Improper installation can re-
sult in serious injuries and /or damage to property. Overhead rigging required extensive experience! Working
load limits should be respected, Certified installation materials should be used, the installed device should be
inspected regularly for safety.
INTERNATIONAL
L
N
LEN
DMX-INTPUT
XLR mounting-plugs (rear view)
1
2
3
P.14
OPERATION INSTRUCTIONS
1
2
FUSE : 5x20mm
250V~ 2A
3
4
PIN3
PIN2
FONCTION
1
Keyboard
2
Display
3
Fuse holder
4
Power supply Input
5
DMX Protocol
6
DMX input
7
DMX output
8
Power supply Output
MODE
ENTER
0.5
m
DESCRIPTION
For value selection & menus navigation
Display menu and values
Protection fuse, replace with same value fuse
100-240V~ power supply INPUT
8 DMX channels functions
DMX signal input - XLR 3 pin
DMX signal Output - XLR 3 pin
To connect more fixtures
P.15
5
6
7
8
Publicité
