Publicité
Les langues disponibles
Les langues disponibles
Product information
A: ADSL line connection
i
B: LAN (PC) connections
C: Reset button
D: Power adapter connection
E: On / Off
F: Power on indicator
G: System ready indicator
Installation
(1) Connect phone line, phone and ADSL modem to ADSL splitter (S). (2) Connect PC to ADSL modem. (3)
1
Connect power adapter.
Switch ADSL modem on.
2
Wait until all indicators light up (LAN indicators will light up only if the LAN port is in use).
3
Configuration
Type '192.168.1.1' in address bar of your internet browser. Press [Enter].
4
Note: If the page can not be found, reconnect network cable, restart PC and reset modem. If this does not
help, check internet settings (CD additional documentation, page 11 - 12).
Type username 'admin' and password 'admin', click 'OK'.
5
Run the quick start wizard.
6
Click 'Next'.
7
Type a new password to replace the default password ('admin').
8
Note: For security reasons, a new password is highly recommended!
Select your time zone.
9
Select encapsulation type given to you by your internet provider (ISP).
10
Note: Refer to 'Table 1' (under 'General' comments) for settings used by the most popular ISP in Italy!
Type username, password and other parameters given to you by your internet provider.
11
Click 'Next' to save all settings.
12
Click 'Close'.
13
All manuals and user guides at all-guides.com
1
H: Wireless LAN activity indicator
I: LAN activity indicators
J: ADSL status indicator
K: PPP status indicator
L: ADSL cable
M: Network cable (cable to PC)
N: Power adapter
Publicité
