TOPMOVE 340654 1910 Notice D'utilisation page 6

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents
1 x school backpack
1 x instructions for use
Technical data
Maximum load capacity: 8kg
8
Capacity/volume: approx. 22l
Date of manufacture (month/year):
03/2020
Intended use
This product has been developed as a school
backpack for private use, for people with a
height of approx. 140–180cm, aged 11 years
and over. The product is suitable for carrying
products with a maximum load weight of 8kg.
Safety information
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion!
• Do not exceed the maximum load capacity
of 8kg.
• Do not carry any unpackaged food in this
product.
• Do not leave wet things inside the product for
an extended period of time.
• The product must not be used for carrying
people.
• Do not fold the product up.
6 GB/IE
Use
Open and fill the product with up to 8kg in
weight. Use the product as a backpack.
Adjusting the height-adjustable
carrying system
The height-adjustable carrying system is for
adjusting the height of the product to a person's
back.
Note: The backpack should be initially adjusted
with the help of a second person and once
correctly adjusted only needs to be checked at
regular intervals to see if the height still matches
the back.
1. Fill the product to a maximum of 8kg.
2. Open the chest strap and hip strap and loos-
en the shoulder straps.
3. Help to put on the backpack.
4. To adjust the height of the product on the
back, loosen the Velcro tab on the height-ad-
justable carrying system (Fig. A).
5. To do this, pull the Velcro straps (1a) up
through the back loops (1b) until the desired
height is reached (Fig. B) and fasten the
Velcro straps to the Velcro tab.
Note: The shoulders are optimally padded
when the harness yoke on the backpack is
between the shoulder blades. The shoulders
are thus optimally encompassed. The hip strap
should be at the level of the hip bones.
Adjusting the hip, shoulder and
chest straps
Please note that the product should be worn as
close to the back as possible so as to reduce the
leverage effect of the weight.
1. Taking the hip strap, bend slightly forwards
and pull the product up until the padded part
of the hip strap is centred level with your hip
bones.
2. Close the hip strap by connecting the buckles
(Fig. C). You can adjust the length of the hip
strap by pulling or pushing on the end of the
strap (Fig. D).
Note: The clasp on the hip strap is sitting cor-
rectly when it is approximately aligned with the
waistband or the top button of your trousers.