lidl BL DB 2000 B1 Instructions D'utilisation Et Consignes De Sécurité page 11

The steam control 4 has 3 positions:
No
steam
NOTE: Continuous steam ironing is only possible
when the iron is held horizontally . If you hold the
iron vertically or set it down, this interrupts steam
operation .
˜ Ending ironing
1 . Turn the temperature control 10 counter-clockwise
all the way to MIN .
2 . Set down the product with the base 8 on an
even, stable surface .
3 . Disconnect the power plug 7 from the power
outlet .
4 . Let the product cool (this take approximately
15 minutes) . Do not leave the product
unattended while it is still hot .
5 . To prevent limescale build-up, empty the water
tank after each use . To do so, open the lid of the
3 . Empty the water tank via the
fill opening
fill opening by holding the iron upside down
over a sink .
˜ Cleaning and care
m
DANGER! Risk of electric shock! Always
disconnect the plug 7 from the power outlet
before cleaning the product .
m
WARNING! Do not immerse the product's
electrical components in water or other liquids .
Never hold the product under running water .
Wipe down the product with a slightly damp
cloth .
Do not let any water or other liquids enter the
product interior .
12 GB/IE/NI
Medium Maximum
steam steam
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product .
Clean the soleplate 1 using a damp cloth and a
mild, non-scouring detergent .
Let all parts dry completely after cleaning .
˜ Self-cleaning function
The product features a self-cleaning function to
remove filth and limescale build-up in the steam
channels .
Use the self-cleaning function at least twice per
month .
If you use tap water: Use the self-cleaning
function after every use .
m
DANGER! Risk of electric shock! Always
unplug the plug power 7 before filling the water
tank .
1 . Never fill the water tank past the max mark 12 .
To do so, close the lid of the fill opening
2 . Turn the temperature control 10 counter-clockwise
all the way to MIN .
3 . Plug the power plug 7 into an appropriate
power outlet .
4 . Set the temperature control 10 to the highest
temperature (turn clockwise all the way) .
5 . Set the steam control 4 to maximum steam
power .
6 . Wait for the product to heat up and the control
light 9 to go off .
7 . Hold the product horizontally over a sink .
8 . Press and hold the self-cleaning button 11 until
no more steam or boiling, soiled water exits the
product .
9 . Empty the water tank of any residual water via
the fill opening
3 .
3 .