Publicité
Les langues disponibles
Les langues disponibles
Attention :
* Please note that the panel should be handled with care. Please be careful not to push down on
the LCD surface with your fingers or any other object from above, as there is a risk of damaging
the panel
* When installing, please be sure to handle the screws carefully to avoid dropping them.
1. Place a soft cloth on a flat and stable surface, and place the monitor screen on top with
the screen facing up.
2. Attach the stand column to the stand mounting section on the back of the monitor using the
included screws.
3. Attach the base to the stand column using the screws included with the base.
4. Make sure that the monitor and stand are securely fixed.
* It supports tilt adjustment. When using the screen tilted forward, please be careful
not to let the main unit fall.
* When using a monitor arm or wall mount, please remove the support column and
attach it using the included spacer.
1. Make sure that the power of the monitor and computer is turned OFF before connecting
the cable.
2. Attach the cable (HDMI, DP, Type-C) that is compatible with the monitor to the monitor.
Attach the same cable to the computer.
3. Turn ON the power of the monitor and computer.
Warning: To work safely, always connect the ground wire before plugging in the power plug.
(Only if there is a ground link). Also, when disconnecting the ground connection, always unplug the power plug
from the outlet first.
Note: HDMI, DP, and Type-C cables should not be connected simultaneously, as this may cause malfunctions.
Please connect only one cable to one computer.
6
QUICK START GUIDE
Installation
Connecting to a Computer
Publicité
